High Probability That We Will Be More Satisfied

Ahsan20

Then it is easy to shake your hand. Optical image stabilizers can be found in cameras of most famous brands. If you are considering buying it, it is worth betting on the following models: Nikon Coolpix P900, Panasonic Lumix DMC-FZ1000 or Sony Cyber-shot DSC-H400. Better equipment will definitely affect the quality of our work, so there is a  with the photos that come out of our hand and eye. How and how to design a business card? July 1, 2020 Articles , Tools , Programs A business card is one of the basic elements of visual identification . It has an informative function as well as an advertising one. For this reason, when designing it, several important rules should be followed.


Preparing a business card for printing - what to do at the very beginning? Although preparation for printing is associated with the last stage of design, some aspects should be taken image manipulation service care of at the very beginning. By following the guidelines, there will be no need to change the design composition at the end of the work. It is also a guarantee of the correct printing of business cards. One of the first things to keep in mind is bleeds . The cut-off areas require an enlargement of the working area on each side by 2 mm. The standard dimensions of business cards for the Polish market are 50 × 90 mm. After adding bleeds, the design should be 54 × 94 mm. A similar principle should be applied when designing business cards for the European or Scandinavian market.



In the first case, the business card format is 55 × 85 mm (59 × 89 mm with bleeds), while in the second the dimensions are 55 × 90 mm (59 × 94 mm with bleeds). Another important aspect is the internal margins . Elements placed on the business card should not be directly next to the edge. Not only does it disturb the composition of the project, but at the same time there is a possibility of accidentally truncating the graphic composition. For this reason, it is worth keeping a safe space on all sides - from 3 to 5 mm from the slope. Before you start designing, you should also change the color mode from RGB to CMYK , the space in which the printing devices work. Thanks to this, the colors on the prints will reflect the colors visible in the project on the computer monitor. Design resolution for printing should be at least 300 dpi.